Utilities
Acceleration Converter
Convert acceleration between m/s², ft/s², standard gravity, gals, and mph per second locally in your browser.
Convert acceleration between meters per second squared, kilometers per hour squared, feet per second squared, inches per second squared, standard gravity, gals, and miles per hour per second. Zero is a valid acceleration.
Conversions run locally in your browser; your acceleration is not uploaded or stored.
Convert one acceleration value into the units you need.
Enter a non-negative acceleration value and choose its unit to see the equivalent meters per second squared, kilometers per hour squared, feet per second squared, inches per second squared, standard gravity, gals, and miles per hour per second. Zero is valid. It runs locally in your browser, so your value is not uploaded or stored.
Frequently Asked Questions
Everything you need to know about this tool, how it works, and privacy.
Which acceleration units can I convert?
Enter an acceleration in meters per second squared, kilometers per hour squared, feet per second squared, inches per second squared, standard gravity, gals, or miles per hour per second. The converter returns the equivalent value in all seven units using 1 km/h² = 1000 ÷ 12960000 m/s², 1 ft/s² = 0.3048 m/s², 1 in/s² = 0.0254 m/s², 1 g = 9.80665 m/s², 1 Gal = 0.01 m/s², and 1 mi/(h·s) = 0.44704 m/s².
Can I convert zero or decimal acceleration values?
Yes. Zero is a valid acceleration, and decimal values are accepted. Negative values are rejected because an acceleration magnitude cannot be less than zero. Results show up to six decimal places when needed.
What happens with very large acceleration values?
The converter shows an error when the entered acceleration is too large to convert safely, instead of returning an unreliable rounded result.
Does my acceleration leave my browser?
No. The conversion and copy action run locally in your browser. CodeASystem does not upload or store the value you enter.